Connecting To A Wireless Network (WPS)

1) Tap the SW1 button 5 times (top left button)
2) Now tap the SW1 button 1 time to enable WPS mode on device.  LED 6 will blink as long as the device is in WPS mode.
3) Follow the router's directions to turn WPS on.
4) Once the Wi-Fi device and the router recognize each other, LED 6 will go solid indicating it has connected.
Note: You can now press the SW1 button twice to indicate the signal strength of the device. 







Have more questions? Submit a request


Please sign in to leave a comment.
Powered by Zendesk